National Dialogue on Highway Automation

Being the work zone data nerds that we are, we attended the National Dialogue on Highway Automation Workshop #2: Digital Infrastructure and Data held August 1st and 2nd in Seattle. The first workshop covered planning and policy. Workshop #3 focuses on freight. #4 is Operations and is held at the same time as the National Rural ITS meeting in Phoenix. The final workshop will be held late this year in Austin and will be more technical in nature as it covers infrastructure design and safety.

Each workshop includes a series of presentations followed by breakout groups where ideas are discussed and then shared with the larger group. The format works well and benefits from the input of a wide range of stakeholders.

You will be happy to hear that work zones came up early and often. In fact the opening comments used work zones as an example of the need for some sort of standardization as every agency now provides varying amounts of data, different types of data, different formats and a very wide range of detail. Another speaker called work zones the “low hanging fruit” for highway automation in general and data collection and dissemination in particular.

There were about 200 in attendance and maybe 30 raised their hands when asked who attended the Automated Vehicle Symposium last month in San Francisco. So, this was an almost entirely new group.

You should also know the FHWA is seriously committed to this process. They had 20 or 30 of their own people at this event running it, moderating the breakout sessions, and asking lots of questions.

There were a number of themes that jumped out at us. One was data quality and verification. The consensus was that state DOTs will probably have the responsibility of verifying data accuracy. But what that process might be is unclear. It will likely vary by data type. In our case it will probably come as a quality check after it is already posted. Work zone activity must be reported in real time to be actionable, so they will weed the inaccurate reports (and reporters) out after the fact.

Remarkably most in the room were well acquainted with the MUTCD. Multiple comments suggested that it needs to be revised to recognize automated vehicles. Some even suggested reducing the leeway states have in specifying sign formats, pavement marking details, etc. to create more consistent traffic control for CAVs. But later others pointed out this is unlikely to happen and the effort would be better spent doing this outside the MUTCD process, at least to begin with.

These two days were time well spent. If you are able, we strongly encourage you to participate in one of their future workshops, especially the event in Phoenix. It will be focused on traffic operations. But because it will be held in conjunction with the NRITS show, it will also spend more time on automated vehicles and rural roads.  Learn more HERE.